Autowatch Ghost Installation
Autowatch Ghost is an immobiliser that safeguards you from key-cloning and hacking. It also stops vehicle theft. It can lower your insurance premiums and you could be eligible for incentives.
The Ghost immobiliser, which is discreet and easy to operate is integrated into the ECU of the vehicle. This makes it impossible for the engine to be started without an unintentional code.
TASSA Approved
Autowatch Ghost is the best method to prevent your car from being taken away by key copying. It has been approved by TASSA. This is the latest in car security and deter thieves in two ways. cost of ghost immobiliser will stop your car from beginning if your keys have been copied and stops you from driving away if they've taken your key fobs.
The next generation device connects to your vehicles CAN data network and a personalized PIN code is entered via the vehicles standard buttons on the dashboard or wheel. The Ghost then prevents the engine starting and can be programmed to a number of different settings, including Gear Blocking Change, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable as it does not use radio frequencies.
The Ghost is a weatherproof tiny device that is fully sealed to be hidden in the vehicle or mounted on the dashboard, where it is virtually impossible for a burglar to locate. It is not an Thatcham Category Approved item, however, it is acknowledged by insurance companies as an effective anti-theft device. It comes with a five-year warranty.
The TASSA verification process ensures that any installation work done on the Ghost will be completed by a skilled and qualified installer. This gives the customer's, insurers' and police's confidence in the high-quality installation. It also ensures that the installers adhere to the manufacturer's guidelines and install the product correctly. Installers who are TASSA members are committed to excellence, and are determined to make a difference in the fight against criminality.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 is a innovative immobiliser that has been designed to safeguard your vehicle from modern key copying. The PIN code system of the Autowatch Ghost 2 is integrated into the vehicle's ECU and makes it more difficult for thieves to clone keys or hack into the system. Additionally it is a discreet device and can be easily installed in a variety of vehicles from minivans to sports automobiles. It's also weatherproof and small enough to be concealed out of sight which makes it more difficult for thieves to spot.
Installation of the Ghost is simple and does not require any additional wiring. It is compatible with many vehicles and connects to the vehicle's data network, CAN. It can also be turned off or disabled by using the main screen of the vehicle. The device is also compatible with a range of mobile apps, making it easy for you to manage your vehicle's security remotely.
The Ghost could have issues after installation, despite its numerous advantages. These issues could be caused by a variety of causes, such as malfunctioning wiring or a non-compliant mobile app. In these instances, calling an expert installer is the best approach to resolve the problem.
Users also experience difficulty in completing the sequence to disarm the Ghost. This is usually due to forgetting the proper sequence or not practicing it. However, the device's manual provides an emergency code that can be used in the event of such issues.
Discreet
Autowatch Ghost is an advanced and discrete security system that guards against vehicle theft. The device utilizes the CAN data network of your vehicle to work and is completely invisible to thieves, which makes it a highly effective deterrent. It is also able to be triggered by other security systems, such as car alarms, and also provides real-time call alerts to the owner. These features can help police in finding your vehicle if it is stolen.
This system is compatible with most vehicles and can be installed in less than an hour. It is an TASSA approved aftermarket device that is compatible with vehicle trackers. Some insurance companies even recognize it. It's also tamper-proof and silent and therefore criminals won't in a position to hear it working. In addition it can be programmed to require a Ghost immobiliser can be programmed to require a PIN code that can be as long as 20 digits, which is virtually impossible to guess.
Ghost can only be used only when the vehicle is in the Service/Valet Mode. This will prevent you from giving your PIN to anyone who requires access to the computer system of your vehicle, like mechanics. The Ghost is backed by a five-year warranty.
The Autowatch Ghost is an innovative immobiliser that can stop key cloning as as ECU hacking and car theft. It's a CAN bus aftermarket device that is a great option for new and old vehicles. It's simple to install and runs quietly, so it can be installed in any vehicle without cutting wires. autowatch ghost 2 immobiliser can also change your pin in a matter of minutes so that you only know it. The system also doesn't use RF scanning or code-grabbing technology, which means it is almost unnoticeable.
Easy to use
Autowatch Ghost is an innovative and effective security device designed to stop vehicle theft by preventing the engine from running. It utilizes a personal code designed by the owner of the vehicle, which must be entered before the car can start. This technology is advanced and enhances the overall security of your vehicle, making it a top choice for many motorists. However, executing this installation procedure requires careful preparation and concentration on detail. This involves ensuring compatibility, relying on expert advice and adhering to the legal guidelines, and thoroughly knowing the Ghost II's operational dynamics. Prioritising these aspects ensures the installation is successful and has the best performance.
Contrary to other systems unlike conventional systems, the Ghost II is silent and can't be spotted by thieves. It is also weatherproof and compact making it difficult to steal your car. It is also compatible with CAN and Lenastark, which allows it to be fitted in various vehicles. It can even be used in vehicles where the battery has to be isolated for maintenance. The Ghost 2 has a Transport Mode that turns off the device while your car is being rented or loaned.
Before starting the Ghost 2, you will have to enter a PIN code that is unique to you. Installers will create a default code, but it is best that you change it as soon as possible to ensure your safety. The device can enter sleep mode to conserve battery power, but it will awaken when it detects an engine management signal. This feature can be disabled in the Settings menu. It is advisable to use the Ghost immobiliser when your vehicle is being driven, and to secure it prior to leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security system that deters car theft by removing the engine of the vehicle. It works by using a unique code that only the owner knows, making it an effective protection against thieves. However, the installation process requires careful preparation and attention to the smallest of details. By ensuring compatibility, relying upon experts in compliance with legal regulations and fully understanding the system's workings it is possible to ensure a smooth installation and reap the maximum benefits from this security system.
This innovative CANbus-based immobiliser is easy to install and works silently, so criminals can't hear it. It utilizes the CAN bus to connect with your vehicle and is compatible with a large variety of vehicles. It is a real revolution in vehicle security. It also shields your vehicle from hacking, key cloning and theft of your car, since it won't start unless you have the correct pin code. It's weatherproof and small, so it's hard for criminals to detect it or modify it.
You'll need to find the CAN High (CAN H) and the CAN Low (CAN L) Wires on the wiring diagram of your vehicle before you begin installing the Ghost Immobiliser. Connect the CAN high and CAN low wires to the ECU. The wires are located under the dashboard or close to the engine.
It is best to hire an installer who is reputable and certified for the installation of the Ghost immobiliser. You can rest assured that the system will be installed correctly and won't hinder the vehicle's operation. The installer will also be able give you tips on how to make use of your new device.