Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's discrete, doesn't employ key fobs or LED indicators and is concealed within the wiring of the vehicle.
It also allows the user to disable the system temporarily by using Transport Mode to use it when they are renting out their vehicle. This guide will take you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique pin code that you choose. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It is not able to be disabled by cutting circuits.
The system is easy to use, but it's important to have an expert installation to ensure a secure and secure connection with your vehicle's ECU. Installers who are approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.
The first step is to disconnect the battery to prevent the possibility of airbag deployment and short circuits. Once this is done the installer is now able to begin work. Basic hand tools can be used to ensure precise connections. A multimeter can be used to check electrical values. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring tidy. The Ghost Immobiliser user manual will provide specific instructions tailored to your model.
It is essential to choose the right grounding spot that is free of any paint or debris during installation. Installers should also ensure that the immobiliser's wires CAN H and can L are connected to the proper ECU ports. Depending on the model, these wires could require soldering or plugged in. To ensure a stable and long-lasting connection it is recommended you choose a high-quality plug.
Transport Mode can be turned on by the client after the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. To do this, the customer must press the service button on the dashboard five times in the space of two seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's an excellent choice for those who rent their vehicles regularly on platforms such as Turo. An immobiliser can reduce insurance costs, since it lowers the chance of theft.
Getting Started
If you're looking for a solution that will secure your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser . The device prevents your vehicle from running even the case that someone steals or copies your key. This is due to its sophisticated technology, which is designed to prevent the engine from running unless the correct PIN code is entered.
The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence only you can identify which makes it impossible for someone else to start your car. This is the most secure security system that protects your pride and joy and will ensure its value when you want to sell it in the future.
Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical problems and malfunctions in the system. First, you need to find and locate a permanent 12V power source and an appropriate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Use high-quality connectors and soldering techniques to ensure a solid connection. Also, make sure to protect the connections by insulating them by using heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
Once the wires have been connected, you can plug in the battery and start the engine to determine whether the immobiliser is functioning. When everything is functioning correctly you can place it in a secure location under the dash or somewhere else in the vehicle. Be sure to conceal it securely so that thieves can't tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it is in compliance with the highest standards of security and is a great deterrent to car thieves. It offers superior protection against key cloning, hacking, and relay attacks. It isn't able to be disabled unless you know the code. The device is easy to use, and can be set up to a service valet setting so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It is directly connected to the vehicle's CAN bus network and communicates with the ECU which makes it virtually undetectable as an addition to your car. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. This is due to the fact that it doesn't send and receive radio frequency signals, and it relies on CAN data to communicate with your ECU. It doesn't even require any modifications to your existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to confirm that you have entered the correct code. You are now able to begin driving your car safely.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from hacking and key cloning and will also protect the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to hand your car to service or valet parking.
You'll require a continuous power source (12V) as well as an earthing point to complete the installation of the Ghost immobiliser. Make sure both are well-insulated and can be touched. It is also recommended to use cable ties to tie and secure the wires, since this will reduce the risk of theft by thieves. To avoid mistakes, make sure to double-check these points and mark them with labels or tape. It's also a good idea to inspect all connections for signs of wear and tear. Connectors that are loose could cause system malfunctions, so be sure they're securely fixed and well-insulated. Also, don't forget test the Ghost Immobiliser after the installation is completed. This will make sure that the unit is operating correctly, and that all connections are safe and well-insulated. Make sure to address any problems immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your car's ECU to stop unauthorised engine start. Its cutting-edge technology protects your vehicle against hacking and key cloning as well as other methods used by thieves to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unparalleled features and subtle design make it a preferred choice for car enthusiasts and security-conscious drivers too.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it is essential to follow every step of the installation procedure. Check the wiring diagram of your vehicle as it will assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once you've found them, you'll have to mark them in a way that they're easily identifiable during the installation process. It's essential to use high-quality materials and tools. Basic hand tools will aid in making precise connections. A multimeter can verify electrical values, and also ensure safety. Cable ties and insulation tape will help keep all connections neat and tidy. Additionally, a user's manual will provide specific instructions specific to your Ghost model.
Before you begin installing it is essential to test the system by entering the PIN code and then starting the vehicle. This test will verify that the immobiliser works according to plan, and prevents unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your routine inspections of the vehicle to ensure the system is always functioning properly.
Once the installation is complete After the installation is completed, you are able to drive your car with confidence. The Ghost will guard your pride and joy from would-be car thieves. It will ensure that no one can drive away with your vehicle even if they don't have the correct PIN code. The Ghost can also be used with a tracker approved by Thatcham to identify any attempts at tampering or theft that could lead to the location of your vehicle in the event of it being stolen.
The Ghost can be used on a wide range of vehicles and is compatible with the majority of major brands. If you are interested in securing your car using this advanced device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Registered installer This certification ensures that we follow strict guidelines and procedures for installing our products. This reassures customers, insurers, and law enforcement that installations are done safely and correctly.