ghost 11 immobiliser is a renowned product that protects your vehicle from key-cloning hacking and theft. This TASSA verified system remains undetectable to thieves and stops them from starting your car.
This device is silent and uses buttons on your vehicle's steering wheel, door panels and the centre console to permit you to create a unique and changeable PIN code sequence up to 20 characters that must be entered prior to the car can begin.
Easy to install
It is more crucial than ever to secure your vehicle. With car crime increasing and cloning devices easily available, it's vital to take precautions. Our Autowatch Ghost immobiliser is a secure and discreet aftermarket solution to protect against key-cloning and vehicle theft. It is virtually undetectable to thieves and works through existing buttons in the steering wheel or door panels, as well as the central console. This enables customers to create a unique disarming sequence similar to a credit card that must be entered before the vehicle can be started or driven away. This makes it nearly impossible to spot, and is not affected by blocking devices or spoofing devices as with other systems.
Installation of the Ghost unit requires a highly-skilled installer. The unit is firmly integrated into your vehicle's CAN bus network which ensures that it is communicating directly with the ECU. This allows the Ghost to be installed without having to alter the factory settings, and also ensures that it cannot be bypassed by a thief using signal boosters or other methods.
When the Ghost is fitted, a new and improved disarm sequence must be inputted to turn on your car. Press the service button 5 times in two seconds, but ensure you don't hold it down for too long. The system will flash twice to show that Transport Mode has been activated. This feature is ideal for classic, sports and luxury vehicles that require their security systems to be temporarily disabled while transport or servicing.
After Transport Mode is activated, the immobiliser will be disabled and cannot be reactivated by entering your PIN code again. This feature is perfect for those who would like to store their vehicles during the winter to prevent theft, or to avoid having to pay higher insurance premiums.
There are no keyfobs, LEDs or other indicators to help you find it.
The Ghost immobiliser is a discrete device that protects your pride and joy from thieves who steal cars by utilizing buttons on the dashboard or steering wheel to enter an unobtrusive pin code prior to starting the engine. It wards off attacks on signal relays, ECU swapping and key cloning. It also connects to a smartphone application to arm or disarm remotely. It's simple to install and is able to be fitted in a wide range of vehicles. It's also extremely discreet, and can be hidden in a difficult-to-find location, such as behind the dashboard or inside the trim of the steering wheel.
This is a great option for high-performance vehicles because it can disable your vehicle's ignition if incorrect pin code is entered. This prevents thieves from stealing your pride and joy. The device can even send an alert to your phone in the event that you've left your car without a key in public areas, giving you peace of mind when you're away from your car.
In contrast to other immobilisers, the Ghost does not require additional fobs or LED indicators and can be concealed easily in an unaccessible area in your vehicle. It is extremely indestructible to detection as it communicates directly with the CAN data network of your vehicle. It also doesn't emit radio signals, making it not detected by RF scanners, or signal jammers.
It's made to be tamperproof and weatherproof, which means it can withstand extreme temperatures. It's also not possible to interfere with by cutting wires or removing the device. Additionally, it doesn't need any cuts in the circuit to function, which means it's inaccessible to organized gangs of thiefs who utilize diagnostics reading devices to identify fitted security systems. It is not affected by diagnostic equipment that analyzes the CAN data for the presence or absence of a security system.
No circuit cuts
The device is not have any indicators with LEDs or key fobs that would indicate its whereabouts. It is hidden under the steering wheel, dashboard or dashboard of your vehicle and makes use of buttons to create a unique PIN sequence that must be entered to turn on the engine. The criminal cannot leave the vehicle even having your keys since they do not know the correct code. The device does not transmit any radio signals, which means that organised criminal gangs that use diagnostics reading devices will not be able to recognize the device.
This cutting edge immobiliser is TASSA approved and could help lower the cost of insurance, particularly for modified vehicles that have been customized by their owners. It also prevents key cloning theft as well as ECU swapping meaning that the only way for a criminal can steal your pride and joy is to remove it.
As the system does not make use of the key fobs that are supplied by the factory or the dashboard buttons, it is a completely silent device and communicates with your ECU through the CAN data circuit that operates in complete silence and doesn't even indicate that it's fitted. This means that a burglar could not make new key fobs or replace the ECU in order to get your vehicle to start. This eliminates any other theft methods used in recent years such as key cloning RFID scanning and code grabbing.
If you've forgotten your PIN code Our engineers have provided you with an emergency reset device that allows you to enter "service mode". This allows the dealer or technician to temporarily start and drive your vehicle so that they can carry out maintenance work, MOTs, or valet parking without having to enter the PIN code once more. When the technician is finished their work or you have removed your vehicle, simply enter the PIN code and the device will go out of service mode depending on the speed and time.
No radio signals
Unlike many other car security systems the Ghost immobiliser does not use an alarm system or key fobs to block vehicles from getting started. It communicates with the vehicle's ECU, the CAN data circuit as well as other circuits to block the engine from starting. This makes it a discrete solution that isn't affected by key cloning or RF scanning techniques used by thieves to bypass other security devices. It can be used in conjunction with tracking devices to increase the safety of your vehicle. You will also be alerted when there is any attempt to tamper or steal.
The Autowatch Ghost is a TASSA-certified device that is insurance-approved and provides superior security against key hacking, the cloning process, and even theft. It is controlled by an app on mobile devices and is secured for security. It has a secure emergency PIN override. It's a reliable cost-effective, discrete and discreet method to safeguard your vehicle from theft.
Ghost isn't without its problems. Users frequently have difficulty completing the correct sequence to disarm. This is due to the fact that the device requires input from buttons already located in your vehicle, such as those on the steering wheel or center console. Users might find this difficult to remember or get wrong particularly when the device is being first used. It is recommended to study the manual that comes with the device to learn this and practise the disarming process before driving the vehicle.
Another issue is that some vehicles are experiencing issues with the CAN data connection, which could affect the functioning of the Ghost. This could be caused by malfunctioning sensors or an damaged OBD port. It is recommended to test the system before attempting to use it in the event of any issues with the connection to CAN.
Change the PIN code with ease
The Ghost is a great product that has been a hit on the market. However changing the pin code can be confusing. The device is preprogrammed by installer at the time of installation, however users may wish to alter it for various reasons. For instance, they might prefer an alternative button that deactivates the device or do not want their installer to be aware. It is also possible that they dislike the pin code they have. It's easy to change your pin number. Follow the steps below to find out how.
Be aware that you will have to turn the ignition on but do not start your vehicle! This process will take only several minutes. The vehicle will then resume normal operation.